 |
LF-Cu Speaker Cable
This cable is used to connect the home-use amplifier to the loudspeaker
The patent structure (see the cutaway view on the pic) -"Coaxial frequency-division transmission" was put to use in this cable.
The negative polarity, also as the external conductance of the coaxial structure, is consisted of...
|
|
 |
LF-Gold Speaker Cable
This cable is used to connect the home-use amplifier to the loudspeaker.
The patent structure (see the cutaway view on the pic) -"Coaxial frequency-division transmission" was put to use in this cable.
The negative polarity, also as the external conductance of the coaxial structure, is consisted o...
|
|
 |
LF-Silver Audio Loudspeaker Cable
This cable is used to connect the home-use amplifier to the loudspeaker
The patent structure (see the cutaway view on the pic) ---ˇ°Coaxial frequency-division transmissionˇ± was put to use in this cable.
The negative polarity, also as the external conductance of the coaxial structure, is consisted ...
|
|
 |
LN-1 Speaker Cable
This product is for connection between Hfi amplifier and loudspeakers.
The basic material for this cables is imported 5N OFC twisted wire, and within each group, there is one piece 0.4mm core wire inside. There are 24K gold-plated plug or banana optional for users.
This cable is an entry level H...
|
|
 |
LN-2 Speaker Cable
This product is for connection between Hfi amplifier and loudspeakers.
LN-2 is the speaker cable of Soundright "Silver Angle" series cables. The inner core is double red and black 0.12mm*36 multi-strand OFC wires covered by PE twisted together. Otherwise, there are Æ
|
|
 |
LN-3 Speaker Cable
LN-3 is the loudspeaker cable for audio use specially, among Cinderella series cables, used to transmit the signals between the audio amplifiers and loudspeakers.
LN-3 has two groups of wires arranged in parallel as its internal structure, each group is consisted of three twisted 1.0mm¦µ8N copper w...
|
|
 |
LS-1 Jumper Cable
This cable is specially designed for replacing the ordinary copper jumper between the binding posts of tweeter and bass speakers on the bi-wiring loudspeaker.
This jumper cable is 4 pieces for one set. Adopt 7 cores single crystal copper twisted wires, twists with 5N 0.1ˇÁ3.3mm cooper foil again a...
|
|
 |
LS-Silver Jumper Cable
This cable is specially designed for replacing the ordinary copper jumper between the binding posts of tweeter and bass speakers on the bi-wiring loudspeaker.
This jumper cable is 4 pieces for one set. Adopt 7 cores single crystal copper twisted wires, twists with 4N silvery foil again as the bas...
|
|